UTG M87 Tactical Scope Mount To Fit Remington 870 Shotgun & Other Models – Made From Aircraft Aluminum w/Matte Black Finish, Low Profile w/ See-thru Feature and V-cut on Top Rail,14 Picatinny Slots on Top,Two Locking Screws Incl For Replacing Original PinThe M87 Tactical Mount fits Remington 870 shotgun 12 Ga. and compatibles and is made from aircraft aluminum with a matte black finish. It has a low profile with a see-through feature and a V cut on the top rail that allows for convenient use of iron sights. 14 Picatinny slots on top for scope applications and includes two locking bolts for replacing the original trigger pins.
Features:
- Made from aircraft aluminum with matte black finish
- Low profile with see-through feature and V-cut on top rail for use with iron sights
- 14 Picatinny slots on top For scope applications
- Two locking bolts for replacing the original trigger pins
Specifications:
- Material: Aluminum
- Weight: 5.5 ounces
- Pieces: 1
- Rail Type: Picatinny/Weaver
- No. of Rails: 1
- Dimensions: 7.5 by 1.9 by 2.6 inches (L x W x H)
About UTG and Leapers, Inc.
Leapers, Inc., headquartered in Michigan, has been in the business of supplying shooting, hunting, and outdoor gear since 1991. By setting un-compromised high standards for all of their business operations, Leapers' goal is to provide total solutions by paying close attention to industry trends and customer feedback, with a focus on making the best-in-class niche products available for hunting, shooting, and outdoor enthusiasts.
In 2009, Leapers made an important decision to start our Made-In-the-USA Manufacturing Operation. With a full commitment to serving more customers in the market with 922R compliant products, Leapers has begun making unique mounting systems under the UTG PRO brand in Michigan and will continue to be innovators in the hunting, shooting, and outdoor industries.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
tactical mount
Speedy delivery! Clean,exact fit, 3mins or less to install on the correct weapon. High enough to look under and see bead sight. My weapon is a Remington 870 express 26in barrel vent ribNON MAGNUM RECEIVER. Slide/trigger and ejection port not affected. IT JUST WORKED THE FIRST TIME!! good product not a single issue. Just advice..Know the EXACT specs of your weapon before purchasing.
1/28/2011
An update after owning this item for a few days now....DONT put alot of muscle into tightening down the allen head bolts for this mount. I gave them a little to much torque and stripped the allen head out, I wrote the company to get a replacement bolt since I alone had screwed the thing up...They solved my problem by sending me some new bolts, at my own cost since I had screwed them up. But great service and fast replies to my emails and days later I had my new parts. Ya just cant beat that service!!
Another tip...take a qtip and put a little oil in the thread BEFORE...
Click here to read the full review for more information about this product.
Great product, very high quality.
Purchased this for my Rem 870 Magnum Express. Installation was a breeze. Used a 3mm allen to pop both trigger pins out, and the bolts went in just like they were supposed to.
The piece is really well made, with a sight tunnel underneath it for using the regular bead sight on the barrel. The fit is spot on, and all 4 bolt holes line up with no fidgeting. It holds my Red Dot sight very securely.
To install:
Remove the 2 pins just above the trigger assembly (be careful not to shock the weapon while these are out, to ensure the trigger remains in place).
Remove the 2 bolts from the mount (they come preinstalled).
Slide the mount over the rear of the gun, lining up the 4 holes.
Insert the 2 bolts (smaller to the front) from left to right.
Tighten securely.
Cycle the shotgun to ensure proper trigger function.
Has the fit but not the finish...
My initial install went great. I test fit it and then backed the screws out a few threads and put a drop of thread locking in and that kept the mount solid. My issues arose when I was using some solvent to remove a little surface rust that was appearing on the receiver bluing. Solvent will completely remove the finish on this part. It is not anodized and appears to be some sort of cast pot metal. If this part were made from 7075 and hardcoat anodized they would be onto something. Until then I have a part thats sporting some sort of urban blight camo.
Product Features :
- Made from aircraft aluminum with matte black finish
- Low profile with see-through feature and V-cut on top rail for use with iron sights
- 14 Picatinny slots on top For scope applications
- Two locking bolts for replacing the original trigger pins
- Dimensions: 7.5 by 1.9 by 2.6 inches (L x W x H)
Rating : 4.2 out of 5.0
List Price : $29.95
No comments:
Post a Comment